Do not use extension cords with 1.25 mm² conductor cross section.
2.9 Using extension cords outdoors
When working outdoors, use only extension cords that are approved and correspondingly marked for this application.
2.10 Using a generator or transformer
This power tool may be powered by a generator or transformer when the following conditions are fulfilled: The unit
must provide a power output in watts of at least twice the value printed on the type identification plate on the power
tool. The operating voltage must remain 5% and -15% of the rated voltage at all times, frequency must be in
the 50 – 60 Hz range and never above 65 Hz, and the unit must be equipped with automatic voltage regulation and
starting boost.
Never operate other power tools or appliances from the generator or transformer at the same time. Switching other
power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in damage to the
power tool.
2.11 Guard with cover plate
CAUTION
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications, use
only the guard with cover plate.
This is available as an optional accessory.
3 Insert tools, accessories
Discs of max. 180 mm diameter, designed for use at 8500/min and a peripheral speed of 80 m/sec
Designation
Item number, description
Abrasive cutting disc
AC-D Universal Premium
Abrasive cutting disc
AC-D Universal Super Premium
Abrasive cutting disc
AC-D INOX
Abrasive grinding disc
AG-D Universal Premium
Abrasive grinding disc
AG-D Universal Super Premium
Diamond cutting disc
DC-D 180
Accessories for the DCG 180‑D / DCG 180‑P
Designation
“Kwik-Lock” clamping nut (optional)
Guard with cover plate
Toolbox
Vacuum cleaner recommended by Hilti
4 Technical data
Right of technical changes reserved.
Power tool
DCG 180‑D/ DCG 180‑P
Rated current / power input
Rated voltage 230 V: 10 A / 2,200 W
Rated voltage 127 V: 15 A
Rated voltage 110 V: 19.4 A / 2,000 W
Rated frequency
50 / 60 Hz
Rated speed
8,500/min
Cutting disc
Diameter 180
en
19
DCG 180-D / DCG 180-P, Art. Nr.71878/A2, 05.03.2013
Printed: 08.07.2013 | Doc-Nr: PUB / 5069492 / 000 / 01