DC 180-S diamond cutter
9
General information
In these operating instructions, this symbol indi-
cates points of particular importance to safety. The
instructions at these points must always be observed
in order to avoid the risk of serious injury.
Danger: electricity
The numbers refer to the illustrations. The illustra-
tions can be found on the fold-out cover pages. Keep
these pages open while you read the operating instruc-
tions.
In these operating instructions, the power tool to which
these operating instructions apply is referred to as “the
tool”.
To ensure correct use, please read the complete operating instructions carefully before the
tool is operated for the first time.
All instructions concerning the use of the tool are given also for your own safety!
Always keep these operating instructions together with the tool. Ensure that the operating
instructions are with the tool when it is given to other persons.
The tool must be held in both hands when in use. Always ensure that you work from a secure
stance.
Contents
Page
General information
9
Description
9
Technical data
10
General safety precautions
11
Special safety precautions
12
Before use
13
Before beginning work
13
Disc guard
13
Changing discs
13
Kwik-lock clamping nut
13
Operation
14
Working with the cutter
14
Care and maintenance
14
Repairs / carbon brushes
15
Warning: Building statics
15
Environment
15
Accessories
15
Manufacturer's warranty – tools
15
EC declaration of conformity
16
DC 180-S operating controls
쐃
Clamping nut
쐇
Kwik-lock clamping nut
쐋
Diamond cutting disc / grinding disc
쐏
Clamping flange
쐄
Clamping ring
쐂
Disc guard
쐆
Clamping lever
쐊
Adjusting nut
쐎
Spindle
쐅
Locating lug
쐈
Clamping screw
쐉
Disc guard
Parts of the machine
씈
Supporting rib
씉
Threaded bushing for side handle
씊
Spindle lockbutton
씋
Side handle
씌
On / off switch
Description
The DC 180-S is an electrically powered diamond cut-
ter for professional use in construction.
The following conditions must be observed when
the machine is in use:
– The machine must be connected to an AC mains sup-
ply which complies with the information printed on
the rating plate.
– Use only insert tools which are intended for use with
this machine.
– The machine is double insulated and must not be
earthed/grounded.
– Observe the accident prevention regulations issued
by the applicable trade association.
Printed: 07.07.2013 | Doc-Nr: PUB / 5069473 / 000 / 00
