![background image](http://html.mh-extra.com/html/hilti/dc-125-s/dc-125-s_operating-instructions-manual_2135613021.webp)
18
Rotate the grinding disc firmly by hand in a clock-
wise direction as shown in the illustration. Con-
tinue rotating the grinding disc until the Kwik-
lock nut has been tightened firmly.
To release the disc: Release the Kwik-lock nut
by turning its knurled rim in a counter-clock-
wise direction. If the Kwik-lock clamping nut
cannot be released by hand, release it using the
pin wrench. Do not use a pipe wrench under any
circumstances!
Initial operation
Important
The voltage of the power source must conform to the specifications printed on the
rating plate on the machine. Machines for 230 V can also be connected to a 220 V
power souce. The machine is double insulated and must not be earthed/grounded.
Switching on:
Slide the ON/OFF switch (2) forwards.
Switching off:
Release the ON/OFF switch (2).
Locking switch: Slide the ON/OFF switch (2) further forwards and press it down to
lock it in the ON position.
Switching off:
Press down the rear of the ON/OFF switch (2). The switch then
returns to the OFF position.
Versions with switch position for sustained operation
Test new grinding / cutting discs by running the tool for at least 30 seconds under
no load. If a disc vibrates, it should not be used.
Do not subject grinding / cutting discs to impacts. Do not allow discs to come into
contact with grease.
Electronic control
Starting current regulator
The starting current required by the machine is several times higher than the nomi-
nal current input.
The starting current regulator limits the current drawn by the machine when starting,
preventing the mains fuse from tripping. It also ensures that the machine starts
smoothly without a jolt.
Constant-speed electronics
The constant-speed electronic control system keeps the running speed almost con-
stant under load or no-load conditions. This permits materials to be ground or cut
optimally as a result of the constant disc speed.
Printed: 07.07.2013 | Doc-Nr: PUB / 5069468 / 000 / 00