![background image](http://html.mh-extra.com/html/hilti/ag-5d-22/ag-5d-22_original-operating-instruction_2135597013.webp)
*2272033*
2272033
English
7
▶
Dust produced by grinding, sanding, cutting and drilling can contain dangerous chemicals. Some
examples are: lead or lead-based paints; brick, concrete and other masonry products, natural stone
and other products containing silicates; certain types of wood, such as oak, beech and chemically
treated wood; asbestos or materials that contain asbestos. Determine the exposure of the operator and
bystanders by means of the hazard classification of the materials to be worked. Implement the necessary
measures to restrict exposure to a safe level, for example by the use of a dust collection system or by
the wearing of suitable respiratory protection. The general measures for reducing exposure include:
▶
working in an area that is well ventilated,
▶
avoidance of prolonged contact with dust,
▶
directing dust away from the face and body,
▶
wearing protective clothing and washing exposed areas of the skin with water and soap.
▶
The user and the other persons in the vicinity must wear eye protection, a hard hat and ear protection
while the product is in use.
▶
Wear protective gloves when changing the accessory tool. Touching the accessory tool can result in
cuts and burns.
▶
Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and installed
accessories are secure.
▶
If the product detects operation beyond its limits or a discharged battery, there is a possibility that the
tool will no longer be braked by the motor.
▶
Do not attach a belt hook to this product.
Power tool use and care
▶
Grinding discs must be stored and handled carefully in accordance with the manufacturer’s instructions.
▶
Never use the power tool without the guard (hood).
▶
Secure the workpiece. Use clamps or a bench vise to hold the workpiece in position. The workpiece is
thus held more securely than by hand and both hands remain free to operate the product.
▶
Do not use cut-off wheels for grinding.
▶
Tighten the accessory tool and flange securely. If the accessory tool and flange are not tightened
securely, the accessory tool may work loose from the arbor due to the braking effect of the motor after
switching off.
Electrical safety
▶
Before beginning work, check the working area for concealed electric cables or gas and water pipes.
External metal parts of the product could give you an electric shock or cause an explosion if you
accidentally damage an electric cable or a gas or water pipe.
▶
Dirty or dusty products that have been used frequently for work on conductive materials should be
checked at regular intervals by
Hilti
Service. Dust (especially dust from conductive materials) or
dampness adhering to the surface of the power tool may, under unfavorable conditions, lead to electric
shock.
Workplace
▶
Apply appropriate safety measures at the opposite side of the workpiece in work that involves breaking
through. Pieces of debris could drop out and / or fall down and injure other persons.
▶
Slits cut in load-bearing walls of buildings or other structures may influence the statics of the structure,
especially when steel reinforcing bars or load-bearing components are cut through. Consult the
responsible structural engineer, architect or person in charge of the building project before beginning the
work.
2.4
Battery use and care
▶
Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
▶
Use only batteries that are in perfect working order.
▶
Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶
Do not under any circumstances modify or tamper with batteries!
▶
Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶
Never use or charge a battery that has suffered an impact or been damaged in any other way. Check
your batteries regularly for signs of damage.
▶
Never use recycled or repaired batteries.
▶
Never use the battery or a battery-operated power tool as a striking tool.
Summary of Contents for AG 5D-22
