![background image](http://html.mh-extra.com/html/hilti/ag-125-a36/ag-125-a36_original-operating-instructions_2135578014.webp)
25
Item Equipment
ACD
AG-D
AF-D
AN-D
DGCW
DCD
DD-M14
G
Clamping nut
X
X
X
X
X
X
H
Clamping flange
X
X
X
X
X
X
I
‚Kwik lock‘
(optional for
G)
X
X
X
X
X
3.9 Li-ion battery charge status display
The charge status of the Liion battery is displayed after one of the two battery release buttons is pressed.
Status
Meaning
4 LEDs light.
• Charge status: 75 % to 100 %
3 LEDs light.
• Charge status: 50 % to 75 %
2 LEDs light.
• Charge status: 25 % to 50 %
1 LED lights up.
• Charge status: 10 % to 25 %
1 LED blinks.
• Charge status: < 10 %
Note
Indication of the charge status is not possible while the power tool is in operation or immediately
after operation. If the battery charge status LEDs blink, please refer to the information given in the
Troubleshooting section.
4 Technical data
4.1 Angle grinder
AG 125A36
AG 150A36
Rated voltage
36 V
36 V
Rated speed
9,500 rpm
8,500 rpm
Maximum disc diameter
125 mm
150 mm
Weight in accordance with EPTA proce-
dure 01/2003
3.5 kg
3.5 kg
Drive spindle thread (arbor size)
M14
M14
Spindle length
22 mm
22 mm
4.2 Noise information and vibration values determined in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one electric tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values determined in accordance with EN 60745
Emission sound pressure level (L
pA
)
80 dB(A)
Uncertainty for the sound pressure level
(K
pA
)
3 dB(A)
Sound (power) level (L
WA
)
91 dB(A)
Uncertainty for the sound power level
(K
WA
)
3 dB(A)
Printed: 14.09.2015 | Doc-Nr: PUB / 5246581 / 000 / 00