Design-In - Mechanical Aspects
16/78
COMX Communication Modules | Design Guide
DOC100901DG18EN | Revision 18 | English | 2013-12 | Released | Public
© Hilscher, 2002-2013
For further module development please reserve additional 10 mm space behind the module. There
are a few larger fieldbus interfaces which does not fit on the small board space. In that case a sec-
ond printed circuit board will be mounted on top of the module and the 10 mm space is necessary
for the connection with flex stripe between these boards.
The general dimensions of the COMX Modules are shown on the following drawings:
M0200376 General Mechanical dimension of COMX-CA-XXX
M0200466 Mechanical dimension of COMX-CN-XXX
M0300636 Mechanical dimension of light pipe of COMX 10/50/51/100CA-XXX
M1100042 Mechanical dimension of light pipe of COMX 50CA-CCS
M0600175 Mechanical dimension of cover and connector of COMX 100CA-RE
M1100121 Mechanical dimension of cover and connector of COMX 50CA-REFO
M1100131 Mechanical dimension of cover and connector of COMX 10CA-XXX (fieldbus)
M0900164 Mechanical dimension of cover and connector of COMX 100CA-XXX (fieldbus)
M1100052 Mechanical dimension of cover and rotary switch of COMX 50-CA-CCS
