Clip Plate
Figure 2-9
Secure the Camera with Mounting Base
7.
Connect the cables, such as power cord, and video
cable.
8.
Check whether the image on the monitor is gotten
from the optimum angle. If not, adjust the camera
according to the figure below to get an optimum
angle.
Pan Position
[0° to 360°]
Rotation Position
[0° to 360°]
Tilt Position
[0° to 75°]
Figure 2-10
3-axis Adjustment
1).
Rotate the enclosure to adjust the pan position
[0° to 360°].
2).
Move the camera body up and down to adjust
the tilt position [0° to 75°].
3).
Rotate the camera body to adjust the rotation
position [0° to 360°].
2.3
Installation of Type III Camera
Before you start:
Both wall mounting and ceiling mounting are suitable
for the camera. Ceiling mounting will be taken as an
example in this section. You can take the steps of ceiling
mounting as a reference, when adopting wall mounting.
Steps:
1.
Paste the drill template (supplied) to the installation
place.
2.
Drill the screw holes and the cable hole (optional) in
the ceiling according to the drill template.
Template
Cable
Hole
Side Opening
Screw
Hole
Figure 2-11
Drill Template
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
