1).
Use the screw driver to loosen the screw on the
mounting base.
2).
Align the notch to the clip plate to separate the
mounting base from the camera body.
Clip Plate
Notch
Figure 2-6
Disassemble the Camera
2.
Paste the drill template (supplied) to the place
where you want to install the camera.
3.
Drill the screw holes and the cable hole (optional)
on the ceiling according to the drill template.
Figure 2-7
Drill Template
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable
.
4.
Attach the mounting base to the ceiling, and secure
them with supplied screws.
Figure 2-8
Attach the Mounting Base to the Ceiling
Notes:
The supplied screw package contains
self-tapping screws, and expansion bolts.
For cement ceiling, expansion bolts are required
to fix the camera. For wooden ceiling,
self-tapping screws are required.
5.
Route the cables through the cable hole, or the side
opening.
6.
Combine the camera body with the mounting base.
1).
Put the camera body in the mounting base.
2).
Align the notch to the clip plate, and rotate the
enclosure a little bit.
3).
Tighten the screw to secure the camera on the
mounting base.
