Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable
.
5.
Attach the mounting base to the ceiling, and secure
them with supplied screws
Figure 2-3
Attach the Mounting Base to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement ceiling, expansion bolts are required to
fix the camera. For wooden ceiling, self-tapping
screws are required.
6.
Route the cables through the cable hole, or the side
opening.
7.
Align the camera with the mounting base, and
tighten the screws to secure the camera on the
mounting base.
Figure 2-4
Secure the Camera with Mounting Base
8.
Connect the corresponding cables, such as power
cord, and video cable.
9.
Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Pan Position
[0° to 360°]
Rotation Position
[0°to 360°]
Tilt Position
[0°to 75°]
Figure 2-5
3-axis Adjustment
1).
Hold the camera body and rotate the enclosure
to adjust the pan position [0° to 360°].
2).
Move the camera body up and down to adjust
the tilt position [0° to 75°].
3).
Rotate the camera body to adjust the rotation
position [0° to 360°].
