EN
11
DISPOSING OF PACKAGING
Please keep all packaging materials (cardboard, plastic
tapes and Styrofoam), so that in case of a problem, the
device can be sent back to the service centre in accurate
condition!
INSTALLING THE APPLIANCE
APPLIANCE LOCATION
The temperature of environment must not be higher
than 45°C and the relative humidity should be less than
85%. Ensure good ventilation in the room in which the
device is used. The distance from any wall of the device
should be not less than 10 cm. Operate the device on flat,
stable, clean, refractory and dry surfaces out of the reach
of children and people with mental disabilities. Install the
device making sure that constant access to the main plug is
ensured. The power cord connected to the appliance must
be properly grounded and correspond to the technical
details. The device is designed for exterior use. Do not
submerge the device in water, douse in water and do
not expose to rain or direct sunlight. The water feed hose
should be sufficiently long to ensure safe operation of the
device.
DEVICE OPERATION – BASIC PRINCIPLES
MSW-PRW2200W
A.
Hydraulic quick coupling
B.
Water feed filter
C.
High pressure hose
D.
Hose clip
E.
Gun holder
F.
Pressure hose hook
G. Reel
H.
Gun bracket
J. Gun
K.
Adjustable nozzle
A knob for turning the device on and off is located on the
device housing.
ON – device on
ON – device off
MSW-PRW1400WB
K
J
H G
F
A B C D
E
ON/OFF
12
11 10
9
8
7
6
5
4 3
1
2
1.
Power cable
2.
High pressure hose
3.
Adjustable nozzle
4.
Extension pipe
5. Gun
6.
Device handle
7.
ON/OFF knob
8.
Power cable hook
9.
Accessories bracket
10. Water feed
11. Cleaning needle
12. Wheel
A knob for turning the device on and off is located on the
device housing.
ON – device on
ON – device off
Assembly
The user is required to provide a hydraulic quick coupler
for their garden hose.
MSW-PRW2200W
1.
Connect the high-pressure hose to the gun using
a hydraulic quick coupler. When these elements are
connected correctly, it is impossible to disconnect
them by pulling in opposite directions. To separate
them, press the lock release button and pull out the
hose.
2.
Attach the gun bracket and power cable hook, screw
the gun holder using bolts to the device housing.
1
2
3.
Insert adjustable spray nozzle to the gun. Press in
and turn the spray nozzle clockwise. When these
elements are connected correctly, it is impossible
to disconnect these two parts by pulling in opposite
directions. For the gun to function properly, connect
all the necessary elements.
4.
Connect the high-pressure hose o the pressurised
water inlet using a hydraulic quick coupler. When
these elements are connected correctly, it is
impossible to disconnect them by pulling in opposite
directions. To separate them, press the lock release
button and pull out the hose.
16.04.2020
Summary of Contents for HT-HUDSON 1400B
Page 47: ...47 16 04 2020 NOTES NOTIZEN ...