16
Step 8 - Operation
8.7
Tensioning the Lines
There are two tension settings that provide taught
Line at various Line extension distances.
Position 1 - 2.0m to 4m of line extension
Slowly rotate the Lever Handle downward until you
feel and/or hear a click.
Position 2 - 4 to 6.5m of line extension
Slowly rotate the Lever Handle downward past
Position 1 until you feel and/or hear a second click.
8.4 Engaging the Arm and Line assembly in the
Receiving Bracket
Lower the Arm onto the
Receiving Bracket between the
two centre Lines.
8.5
Seat the Arm within the Receiving Bracket. Allow the
Arm and Lines to slide back towards the cabinet and
engage on the two Locking Pins within the Receiving
Bracket.
Note:
Two holes in the centre of the Arm must
engage with the Receiving Bracket Locking Pins.
8.6
With the Arm secure within the Receiving Bracket,
you may now tension the Lines using the Lever
on the cabinet.
Position 1
Position 2
HLS0046_4-6 line_Owners Manual_v6.indd 16
1/07/13 5:16 PM
