6
Step 3 - Mounting your cabinet
3A
MOUNTING YOUR CABINET TO A MASONRY WALL
3a.1
Determine the best location for the installation of your
product. A Drilling Template is supplied to assist you with
marking out the fastener hole locations. Line height
indicators and centre lines are also shown on the Drilling
Template for both the cabinet and receiving bracket. Mark
out a centre line for your product within your allocated site.
3a.2
Determine the cabinet location. Ensure that either
side of this centre line and the area where the cabinet
is to be installed on the wall is free from pipes and
other obstructions.
3a.3
Mark the cabinet centre on the wall and temporarily
secure the Drilling Template to the wall using tape at the
desired height. Use a spirit level to ensure that the cabinet
is level.
3a.4
Align the centre of the Drilling Template with the proposed
Receiving Bracket location. Ensure that the projected
centre line is perpendicular to the wall.
Note:
Determine the line height from the Receiving Bracket
before drilling holes. If mounting the Receiving Bracket to
an Adjustable Post Kit refer to
Fig. 3a
and the Adjustable
Post Kit installation manual.
Line height
Centre line
Note:
MAX line height when mounting
Receiving Bracket to a Post is 2 metres.
Line height of Receiving Bracket =
height to top of post - (subtract) 2.5cm (1").
Fig. 3a
HLS0046_4-6 line_Owners Manual_v6.indd 6
1/07/13 5:16 PM
