11
4.1
Rotate the Lever outward slightly and feed the Lever
through the slit in the right hand side End Cover.
Align the hooks on the End Covers with the slots on
the cabinet. Push the End Covers onto the cabinet
so that the hooks sit within the slots.
4.2
Push the End Covers downward to fully engage the
hooks. The top and front surfaces of the cabinet
should sit flush with the End Covers.
4.3
Replace the Lever Handle and screw.
4.4
Using the Arm Handles (refer to 8.1 and 8.2 on
page 15) lower the Arm and pull it to the front of the
cabinet. This is to expose the underside cavity.
4.5
Snap the Centre Mount Cover into position within
the cavity at the rear of the underside of the unit.
The Cover should sit flush with the surrounding
surfaces of the cabinet.
4.6
Return the Arm to its original position within
the cabinet.
Step 4 - Replacing Covers and Lever Handle
HLS0046_4-6 line_Owners Manual_v6.indd 11
1/07/13 5:16 PM
