Hills 100710, Product Manual

Page: 5 / 8

5
3. Extension Lance
Can be added to the existing Lance to help in
hard-to-reach applications
3.1 Unscrew the Large Handle Retaining Cap 321
and pull the Lance and Nozzle out of the Handle
Assembly. Inspect parts. If they are still in good
condition they can be re-used.
3.2 If they are not in good condition then discard
them and use the new Lance and Nozzle supplied
in the kit.
3.3 Push the Extension Lance 334 into the Handle
Assembly and tighten the Handle Retaining Cap
321 firmly.
3.4 Push the other end of the Extension Lance
334 into the Nozzle and Lance and tighten the
Retaining Cap 321 firmly.
Note:
Do not use hand tools to tighten.
Extension Lance
Lance and Nozzle
Lance and Nozzle
321
321
321
334
Handle Assembly
Handle Assembly