2
Introduction
Important
Read these instructions before assembly
and use.
Release pressure from the bottle before refilling
or replacing parts. This is done by slowly pulling
up the Safety Valve and holding until all air
has been released. Then unscrew the
Container Cap.
Note:
some remaining air may be expelled.
Ensure bottle has been rinsed with clean water
before any servicing is done.
Note:
Inspect your Nozzle and Lance for
damage. This pack contains replacement parts
for the Nozzle and Lance. It also includes an
Extension Lance for hard-to-reach applications.
Pack contents
Part name
Qty.
Nozzle assembly with Cone spray
1
Nozzle Strip spray
1
Lance with Caps and O Rings
1
Extension Lance with Caps and
O Rings and Joiner
1
Please retain this Product Manual. Record the following
information for future reference.
Product Number (printed on label): FH
Date of purchase:
Name and location of store:
Made in China
