manualshive.com logo in svg

Hillenbrand Hill-Rom P1440, User Manual

Share
Download
Hillenbrand Hill-Rom P1440 User Manual Download Page 3

i

© 2005 by Hill-Rom Services, Inc. ALL RIGHTS RESERVED.

Manufactured for Hill-Rom by Optima Healthcare, Inc.

Distributed by:
HILL-ROM COMPANY, INC.
1069 STATE ROUTE 46E
BATESVILLE, IN 47006-9617

Authorized European Union Representative:

HILL-ROM EUROPE
LE RABELAIS – PARIS NORD II
22 AVENUE DES NATIONS
BP 50436 VILLEPINTE
95944 ROISSY CDG CEDEX
FRANCE
TEL: +33 (0)1 49 89 40 00

No part of this text shall be reproduced or transmitted in any form or by any means, 
electronic or mechanical, including photocopying, recording, or by any information or 
retrieval system without written permission from Hill-Rom Services, Inc. (Hill-Rom).

The information in this manual is confidential and may not be disclosed to third parties 
without the prior written consent of Hill-Rom.

Fifth Edition 

First Printing 2004

Printed in Taiwan

Basic Care™ is a trademark of Hill-Rom Services, Inc.

Comfortline® is a registered trademark of Hill-Rom Services, Inc.

Hill-Rom® is a registered trademark of Hill-Rom Services, Inc.

The information contained in this manual is subject to change without notice. Hill-Rom 
makes no commitment to update or keep current, the information contained in this 
manual.

Hill-Rom reserves the right to make changes without notice in design, specifications, and 
models. The only warranty Hill-Rom makes is the express written warranty extended on 
the sale or rental of its products.

To order additional copies of this manual (usr124), refer to the back cover for contact 
information. For countries not listed on the back cover, contact your distributor.

NOTE:
The back cover is a comprehensive list of Technical Support contact information for 
Hill-Rom. The product discussed in this manual may not be available in all of the 
countries listed.

Summary of Contents for Hill-Rom P1440









































Reviews:

No comments

Brands by name

Popular brands

Load more brands