13
4. Pull the Trendelenburg or Reverse
Trendelenburg lever, and lower the
bed until the bed reaches the desired
position (see “Raising and Lowering
the Bed” on page 12).
NOTE:
To determine the specific degree of
Trendelenburg or Reverse Trendelenburg, refer to the
Trendelenburg gauges located on each side of the bed.
To change the bed position from Trendelenburg or Reverse
Trendelenburg, raise the bed to its highest position (see “Raising
and Lowering the Bed” on page 12).
Equipment Sockets
An IV rod can be installed in any of the four
equipment sockets located at the head end and foot
end of the bed.
Bed End Panels
The Basic Care™ Bed has post-type
mountings for the bed end panels.
Install a bed end panel by fitting it on the
two vertical mounting posts at the end of
the bed.
Remove a bed end panel by lifting it
vertically off the mounting posts.
handle
Reverse
Trendelenburg
handle
Trendelenburg
Summary of Contents for Hill-Rom P1440
Page 1: ...USER MANUAL Basic Care Bed From Hill Rom Product No P1440 and P1441 USR124 REV 5 ...
Page 2: ...1 ...
Page 38: ...32 ...
Page 39: ...0 ...
