4.6 Spreader Shaft and Pedal Subassemblies
Chapter 4: Removal, Replacement, and Adjustment Procedures
Page 4 - 12
TRANS
l
LIFT
TM
Resident Stand Assist Service Manual (man173)
4
4.6
Spreader Shaft and Pedal Subassemblies
Tools required:
Hammer and pick
Socket head wrench
Removal
1. Set the caster brakes.
2. Remove the base cover (refer to procedure 4.3).
3. Remove the tie rod assemblies (refer to procedure 4.4).
4. Remove the roll pin (A) securing the pedal assembly (B) to the spreader
shaft subassembly (C) (see figure 4-7 on page 4-12).
Figure 4-7. Spreader Shaft and Pedal Subassemblies
5. Remove the pedal subassembly (B) from the spreader shaft subassembly
(C).
6. Remove the spreader shaft subassembly (C) from the back support
subassembly (D).
m173_014
