Features
56
TotalCare® Bariatric Bed and TotalCare® Bariatric Plus Therapy System
User Manual (143434 REV 8)
To Change Settings:
1. Scroll to Percussion, Vibration or Perc/Vib. Press ENTER.
2. Scroll to Change Settings. Press ENTER again. This confirms the
desire to change the settings.
3. The icon moves to Percussion, Vibration or Perc/Vib Settings on
upper left screen. Use the Up/Down arrows to make setting
changes. Press ENTER to advance to next setting.
4. Continue making changes, scrolling or using the Up/Down arrows
and the ENTER control until all changes are made.
5. When the icon moves to Accept Changes. Press ENTER if acceptable. Press ENTER again to start
therapy.
6. If percussion/vibration therapy is not going to be used at the time of setting, scroll to ACCEPT Changes,
press ENTER. Release the Graphical Caregiver Interface (GCI)® Control or select GO TO Home Screen
for other options.
7. If not acceptable, scroll to Change P and V setting, Clear Changes, Cancel/Return, or GO TO Home
screen, press ENTER.
To Stop Percussion and/or Vibration Therapy:
Graphical Caregiver Interface (GCI)® Control method:
1. On the Graphical Caregiver Interface (GCI)® Control in the siderail,
touch the ENTER control or the UP or DOWN button to activate the
screen.
2. Scroll to Rotation or Normal/Standard. Press ENTER.
Siderail method:
1. On the siderail opposite the Graphical Caregiver Interface (GCI)®
Control, press the ENABLE control, and then the Normal/Standard control or the Resume control, if
another therapy was suspended during Percussion and Vibration.
Pressure Redistribution Surface CPR Function
When the CPR function is activated, the surface will go into Max-inflate mode. A cardiac arrest board is recommended.
After 30 minutes of Max-inflate, the mattress will automatically go into Normal mode. This change in pressures will not
change the effectiveness of CPR if a cardiac arrest board is in place.
To Stop Max-inflate:
Graphical Caregiver Interface (GCI)® Control method:
1. From the Home Screen, scroll to Normal/Standard or other desired mode. Press ENTER.
Siderail method:
1. On the siderail opposite the Graphical Caregiver Interface (GCI)® Control, press the ENABLE control and
Normal/Standard control.
