Features
38
TotalCare® Bariatric Bed and TotalCare® Bariatric Plus Therapy System
User Manual (143434 REV 8)
NaviCare® System
The NaviCare® System is an enterprise system that connects and monitors Hill-Rom® beds and surfaces. The system
sends bed and surface data to network applications for caregivers to view and receive alerts. For complete operational
instructions for the NaviCare® System, refer to the NaviCare®
System User Manual
(P004447).
The system’s Alerts feature is configured from the NaviCare® System application. The application is turned on or off at
the nurses station; however, the Alerts feature can be deactivated and reactivated from the bed.
An indicator at the upper left corner of the Graphical Caregiver Interface (GCI)® Control shows the status of the bed
connection to the NaviCare® System.
An indicator next to the NaviCare® menu item on the Graphical Caregiver Interface (GCI)® Control shows the status of
the Alerts feature:
•
Inactive—indicator is off
•
Active—indicator is on
To deactivate the Alerts feature at the bed, do as follows:
1. At the Home Screen, select OnSite. Press ENTER.
2. Select OnSite Alerts Status. Press ENTER.
NOTE:
When the Alerts feature is deactivated from the bed, an indicator will show on
the NaviCare® System application.
To reactivate the Alerts feature at the bed, repeat steps 1 and 2 above.
Manual Controls
In the absence of AC power, the manual control can be used to operate all bed
system articulation functions.
To Activate:
•
Press and hold the appropriate caregiver control and step down on
the blue manual foot pedal repeatedly.
•
Continue until the desired position is achieved.
•
To activate the following controls, press the Enable control first:
Foot Retraction, Foot Up/Down, Chair, Trendelenburg, and Reverse
Trendelenburg controls.
•
To operate the Foot Down control, use the hydraulic foot pump.
•
To operate the other down functions, press the appropriate caregiver control.
