manualshive.com logo in svg

Hill-Rom Excel Care, User Manual, Page: 24 / 60

Share
Download
Hill-Rom Excel Care User Manual Download Page 24

Mattress Assembly 

The Excel Care™ Bariatric Bed has one of these two mattress options: 

•  Excel Air™ Low Airloss Therapy Surface (see “Excel Air™ Low Airloss Therapy 

Surface (P611CA)” on page -25) 

•  Excel Air ™ Foam Mattress with inflatable side bolsters (see “Excel Air™ Foam 

Mattress with Inflatable Side Bolsters (P612EA)” on page -30) 

Install the Mattress and Air Supply Unit 

1.  Raise the head end of the bed to approximately 30°. 

2.  Turn the mattress so its foot end is face up at the foot end of the bed. 

3.  Use the mattress straps on the bottom of the mattress to attach the mattress to the 

mounting slots at the head, seat, and foot sections of the bed frame. Make sure the 
mounting brackets correctly attach the mattress straps to the mounting slots. 

4.  Raise the siderails on the bed (see “Raise and Lower the Siderail” on page -10). Make 

sure there are no gaps between the mattress and the siderails. 

5.  Hang the air supply unit on the mounting bracket on the footboard. 

6.  For an Excel Air™ Low Airloss Therapy Surface, connect the hoses from the 

mattress to their respective color-coded connectors on both sides of the air supply unit: 

•

On

 the  patient right-hand side of the air supply unit, connect the red, blue, 

green, white, black, and yellow hoses. 

•

On

 the  patient left-hand side of the air supply unit, connect the white, black, and 

yellow hoses. 

NOTE:
The yellow hose is the low airloss hose from the top cover of the mattress.

7.  For an Excel Air ™ Foam Mattress with inflatable side bolsters (see “Excel Air™ 

Foam Mattress with Inflatable Side Bolsters (P612EA)” on page -30), connect the 
white and black hoses from the mattress to the color-coded connectors on the patient 
right-hand side of the air supply unit. 

WARNING: 

Incorrect use or handling of the power cord may result in damage to the power 
cord. If damage has occurred to the power cord, immediately remove the bed 
from service, and contact the appropriate maintenance personnel. Failure to do so 
could result in personal injury or equipment damage. 

8.  Plug the power cord into the patient’s left-hand side of the air supply unit. 

9.  Use the seven magnets to attach the power cord along the bed to an appropriate power 

source: 

a.  Attach the power cord to the metal frame at the air supply unit. 

b.  Attach the power cord at the patient’s left foot corner of the bed. 

23 

Summary of Contents for Excel Care





























































Reviews:

No comments