Accessories
34
Affinity® Three Birthing Bed and Affinity® Four Birthing Bed User Manual
(USR025 REV 6)
The line manager can hold one set of the following:
•
4 monitor lines of 1/8" diameter
•
2 suction lines of 1/2" diameter
•
2 oxygen lines of 3/8" diameter
•
8 IV infusion lines of 1/4" diameter
•
1 feeding tube of 3/8" diameter
Permanent IV Pole—P3732A
The Permanent IV Pole option consists of one IV pole that supports up to two
IV pumps plus bags. The IV pole is attached to the bed frame near the corner
of the headboard.
CAUTION:
Do not exceed the 40 lb (18 kg) IV pole or 2.5 lb (1.1 kg) hook weight
capacity. Equipment damage could occur.
The IV pole can support up to 40 lb (18 kg). The hooks can support 2.5 lb
(1.1 kg).
CAUTION:
Make sure any IV pole mounted infusion pumps are not in the direct
path of the moving head section. Interference with head section
articulation could result.
Make sure you mount infusion pumps on the
lower
part of the IV pole.
To Deploy
1.
Lift the IV pole from its stored position behind the headboard and put it straight up.
2.
Make sure that the pole drops and locks into position.
3.
Raise the upper section of the pole to the desired height. The IV pole is ready for use.
To Store
WARNING:
Make sure the patient hands are not in the path of travel while you lower the IV pole. Injury could occur.
1.
Grasp and hold the upper section of the IV pole. Push the upper collar down, and lower the upper pole
section into the lower pole section.
2.
Lift the lower section of the IV pole up, and lower the pole down to the stored position behind the
headboard. The pole should rest in the storage slot provided on the bed frame.
Summary of Contents for Affinity Four Birthing Bed
Page 2: ......
Page 8: ...vi Affinity Three Birthing Bed and Affinity Four Birthing Bed User Manual USR025 REV 6...
Page 65: ......
