Hill-Rom Affinity Four Birthing Bed, User Manual

Page: 39 / 66

Accessories
Affinity® Three Birthing Bed and Affinity® Four Birthing Bed User Manual (USR025 REV 6) 31
Permanent IV Pole—P222101
The Permanent IV Pole mounts to the head section frame. The pole slides to either side
of the bed and enables additional IV bags and pumps to be mounted. The P222101 can
not be used on D model beds.
The maximum safe working load is 25 lb (11 kg).
To Deploy:
• Lift the IV pole from its stored position behind the headboard, and position it
straight up.
• Make sure that the pole drops and locks into position.
• Raise the upper section of the pole to the desired height. The IV pole is ready for use.
To Store:
• Grasp and hold the upper section of the IV pole. Push the upper collar down, and lower the upper pole
section into the lower pole section.
• Lift the lower section of the IV pole up, and lower the pole down to the stored position behind the
headboard. The poles should rest in the storage slots provided on the bed frame.
CAUTION:
Make sure any IV pole mounted infusion pumps are not in the direct path of the moving head section.
Interference with head section articulation could result.
Procedural Light—P7925D120
This light is mounted on a four leg base with two locking casters for stability. It is designed to provide no-drift,
shadow free, color correct light.
Procedural Stool—P11824 (no longer available)
This stool adjusts for convenience and comfort using a foot controlled gas spring.
The maximum safe working load is 300 lb (136 kg).
Rail and Hanger—P53120120 and P17073001
The equipment rail (P53120120) and hanger with bracket (P17073001) are for the Affinity® Four Birthing Bed,
Stow and Go™ foot section.
Sheets—SA1528, SA4585, SA1529, and SA4586
A sheet set includes pillow case, top, and custom-fitted, bottom sheets. Additionally, the two-piece bottom set is
available separately.
Before the Affinity® Bed is used by a patient, sheets must be placed over the mattress.
Permanent IV Pole