background image

Environmental

The Dry-Pac medium is an inert, environmentally safe product. As a synthetic copy of a naturally
occurring product it can be disposed of in any normal waste treatment method. It is non toxic,
chemical free and entirely safe to handle without protective equipment. Normal precautions should
be taken when handling or storing the medium within the vicinity of children and pets. Although
not harmful if swallowed it may cause the symptoms of very slight dehydration.

Dry-Pac Medium Storage

The Dry-Pac medium is supplied in vacuum packed sachets with the optimum quantity to refill the
Dry-Pac cartridge. Due to the nature of the medium, ambient temperature may cause expansion or
contraction of the foil container. This is normal and has no detrimental effect on the life of the medium.
Heat will cause the foil to expand like a balloon; cold will cause a “shrink wrap” condition. Providing
the foil sachet remains intact the medium will not be impaired under most storage conditions and can
be stored for many months..

Page 9

Accessories

The following equipment is available from the Website

MK4 Hill Pump Dry Pac Kit

This kit is for the MK4 pump comes with everything you need
including 1 sachet of DryPac Refill

Part No:   Z4128-640

Part No:   Z2128-300

Din 200 Female Adaptor

Part No:   Z2128-350

Walther and Diana Adaptor

Adaptor for direct connection to Walther or Diana Airgun Cylinders.
Direct connection to the end of the hose without bonded washers.

Part No: Z2128-600

Quick Release Coupling

Quick Release Coupling for fast connect/disconnect of the hose or
adaptor.
1/8" BSP connections.

Note:

 All adaptors must be fitted to hose and tightened using an appropriate spanner to

            prevent air leaks

Summary of Contents for 4128-005












Reviews: