ASSEMBLY INSTRUCTION
1, Check the control knob for gas supply system is turned to OFF position before
starting your assembly.
2.Put tank Holder(J) into panel(F) and panel(H). Attach it with 2 screws (a)
using the Wrench(d). Please do not fully tighten.
3.Insert Door (I) into the hole on the Tank Holder(J).
4.Attach the Rail (K) to the Door (I) and Panels (F) and (H) using 4 Screws (e)
using the Wrench(d). Please do not fully tighten.
8