background image

AZ Patio Heater, LLC (“Vendor”) warrants to the original retail purchaser of this heater to 

no other person, that if this heater is assembled and operated in accordance with the 

printed instructions accompanying it, then for a period of one year from the date of 

purchase, all parts in the heater shall be free from defects in manufacturing and 

workmanship. Vendor will require reasonable proof of your date of purchase from an 

authorized retailer or distributor. Therefore, you should retain your sales slip or invoice. 

This limited Warranty shall be limited to the repair or replacement of parts, which prove 

defective under normal use and service and which the vendor shall determine in its 

reasonable discretion upon examination to be defective. Before returning any parts, you 

should contact Vendors 

customer service department using the contact information listed below. If Vendor 
confirms, after examination a defect covered by this limited warranty in any returned part, 

and if Vendor approves the claim, Vendor will replace such defective part without charge. 

If you return defective parts, Transportation charges must be prepaid by you. Vendor will 

return replacement parts to the original retail purchaser, Freight or postage prepaid. 

The limited Warranty does not cover any failures or operating difficulties due to accident, 

abuse, misuse, alteration, misapplication, improper installation or improper maintenance 

or service by you or third party. The failure to perform normal and routine maintenance on 

the product, shipping, damage, abnormal adjustment to the burner, damage or repairs 

related to insects, birds, or animals of any kind, and damage due to weather conditions as 

set out in this owner’s manual. In addition, the Limited Warranty does not cover damage 

to the finish such as scratches, dents, discoloration, rust or weather damage, after 

purchase. Please protect your investment. 

The limited Warranty is in lieu of all other warranties offered by any retail company. 

Vendor disclaims all warranties for products that are purchased from sellers other than 

authorized retailers or distributors. AFTER THE PERIOD OF THE 1 YEAR WARRANTY, 

VENDOR DISCLAIMS ANY AND IMPLIED WARRANTIES, INCLUDING WITHOUT 

LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 

A PARTICULAR PURPOSE. FURTHER, VENDOR SHALL HAVE NO LIABILITY 

WHATSOEVER TO PURCHASER OR ANY THIRD PARYY FOR ANY SPECIAL, 

INDIRECT, PUNITIVE, INCIDENTAL, OR CONSEQUENTAL DAMAGES. Vendor 
assumes no responsibility for any defects caused by third parties. This limited warranty 

gives the purchaser specific legal rights; a purchaser may have other rights depending 

upon where he or she lives. Some jurisdictions do not allow the exclusion or limitation of 

special, incidental or consequential damages, or limitations on how long a warranty lasts, 

so the above exclusion and limitations may not apply to you. 

Vendor does not authorize any person or company to assume for it any other obligation 

or liability in connection with the sale, installation, use, removal, return, or replacement 

of its equipment, and no such representations are binding on vendor. 

For warranty service, please contact 

[email protected] 

or call us toll free 

at 

1-

888-775-1330.

19

Summary of Contents for AFP-RT




















Reviews: