background image

SAFETY INFORMATION 

Page 2 

Before you assemble or operate this unit, please carefully read this entire manual. Failure to do so 

may result in a fire, explosion, injury or death.

 

WARNING

 

• The installation of this unit must adhere to local codes or either the National Fuel Gas Code, ANSI

Z223. 1/NFPA54, OR CAN/CGA-B149.1, National Gas and Propane Installation Code.

• THIS UNIT IS INTENDED FOR OUTDOOR USE ONLY! This product should only be used

outdoors in a ventilated space and should not be used in any enclosed area.

• .

• Only use propane gas when operating this unit. This unit is not designed or compatible with other

fuel sources.

• When igniting this unit, stay away from the burner as the flame will light up and may cause injury.

• LP GAS WARNING: Do not use any more than 1/4in depth lava rocks/pumice stones above the

burner holes. Doing so will suffocate the flame.

• If you hear, and/or see gas leaking directly from the propane tank (leaks are also evident by smell)

1. Do not attempt to fix the problem yourself. 

Do not use a flame to check for gas leaks.

2. Contact your gas supplier or fire department for help.

• Too much propane (flooding) may result in the propane gas pooling not allowing it to burn. Ensure

air flows freely through the unit so that any excess or remaining gas may escape.

• The max. inlet supply pressure: max. Gas supply 11in w.c. (2.74kPa)

• Use LP propane tanks with capacity 20 lbs.

• You must use a propane tank that has a collar to protect the gas valve.

• The tank system must be set up for vapor withdrawal.

• Discontinue use if any part of the propane tank is damaged. Rust and dents may be hazardous and

should be inspected by a gas supplier.

• Do not burn anything other than the provided materials for this fire bowl.

• Keep away from the unit for the first 20 minutes after igniting your unit for the first time, as lava

rocks/pumice stones could pop out and cause injury. Should any rocks pop out, discard them.

• Always ensure that lava rocks/pumice stones are completely dry before use. Failure to do so may

cause them to crack or pop.

• Do not operate unit until all parts are fully assembled.

• Do not paint or color any part of this appliance.

• Unit is extremely hot while in use, do not attempt to move it while in use.

• Never leave this appliance unattended while in use.

• This unit is not intended for cooking.

• Keep any flammable items away and do not use any other fire bowl cover for this unit.

• Keep a safe distance away to avoid burning skin or clothing.

• Do not sit on, or rest hands or feet on this - appliance

• Never place hands or fingers on upper portion of this unit while in use.

• Keep fuel supply hose away from heated surfaces.

Summary of Contents for AFP-CMP-RND













Reviews: