background image

Page 3 

• Combustible material should not be within 72 inches of the top of the unit, or within 48 inches

around the entire unit.

• If the flame goes out while burning, turn the gas valve off. Wait 5 minutes before repeating the initial

lighting procedure.

• Do not add water into the unit.

• Do not operate unit if any part has been under water.

• Do not disconnect any part while unit is in use.

• Do not store a spare propane tank on or near this unit.

• If the appliance is being stored indoors, detach the propane tank and leave outdoors.

• Always remove protective cover before operating the unit.

• Do not set the protective cover over the unit until it is turned off and completely cooled down.

• Check for leaks after not using the unit for long periods of time.

• Children should never operate this unit. Children must be supervised while near this  unit.

• Keep gas tank at least 5 feet away from unit when lit. (if external  tank)

• The maximum gas supply pressure is 250psi.

• Inspect all elements of this heating unit before each use. If there is damage, the burner must be

replaced.

• Keep the hose out from any pathways to eliminate any accidental damage. (if external tank)

• Be aware of the hazards of high temperatures and stay away from the unit to avoid any burns or

injury.

• The gas supply tank should be constructed and marked with the specifications for the LP gas tanks

• The LP gas tank must have a listed overfilling prevention device and a QCCI or Type I, (CGA810) LP

gas tank connection.

• This appliance should not be used on plastic or artificial wood desks.

• Children and adults should be alerted to the hazards of high surface temperatures and should

stay away to avoid burns or clothing ignition.

• Clothing or other flammable materials should not be hung from the appliance or placed on or

near the appliance.

• Any guard or other protective device removed for servicing the appliance shall be replaced

prior to operating the appliance.

• Installation and repair should be done by a qualified service person. The appliance should be

inspected before use and at least annually by a qualified service person. More frequent cleaning

may be required as necessary. It is imperative that the control compartment, burners and

circulating airways of the appliance are kept clean.

• Allow heating item to cool completely before placing on lid.

• DO NOT use appliance while lid is installed. Always remove the lid while heating item is in use.

Summary of Contents for AFP-CMP-RND













Reviews: