background image

Installation

1

Device Wiring (Normal)

2

 

DS-K1T

331 Series Face Recognition Terminal

     

Quick Start Guide

UD15536B-A

Installation Environment:

Avoid backlight, direct sunlight, and indirect sunlight.

For better recognition, there should be light source in or near the installation environment.

Appearance and Dimension:

1
2

Notes:

 

    The installation height here is the recommended height. You can change it according to your actual needs.

    For easy installation, drill holes on mounting surface according to the supplied mounting template.

Drill holes on the wall or other surface according to the mounting template and install the gang box.

Use two supplied screws (SC-KM4x25-SUS or KA4×22-SUS) to secure the mounting plate on the 

gang box.

Route the cables through the cable hole of the mounting plate, and connect the terminals with the 

external devices' cables.

Align the device with the mounting plate and hang the device on the mounting plate.

Use one supplied screw to secure the device and the mounting plate.

Installation with Gang Box:

Base Mounting:

Device

Mounting 

Plate

Gang 

Box

Wall

3
4

Route the cables through the cable hole of the bracket, and connect the terminals 

with external devices' cables.

Align the device two holes with the two buckles on the bracket.

Hang the device on the bracket and make sure the buckle in the middle of the bracket 

is inserted in the groove on the device back.

Place the assembled device and bracket on the desk or other flats.

1

2
3

4

Direct Sunlight Direct Sunlight

through Window

Backlight

Indirect Sunlight 

through Window

Close to Light

2

3

4

1

Screen

Camera

White Light

Camera

microUSB

Interface

Tamper

Network Interface

Wiring Terminal

Debugging Port

11

0 mm

120 mm

23 mm

Before you start:

 

According to the baseline on the mounting template, stick the mounting template on the wall or other 

surface, 1.45 meters higher than the ground.

Note:

 

Make sure the output of external power supply fulfils LPS.

Steps:

Cable Hole

Network Interface

GND

GND

BTN

GND

C7

C6

C1
C2

C3
C4
C5

B1
B2

B3

Black

Orange

Yellow

Red
Black

Blue
Black

Green

White

Grey

Purple

Black

-

+

RS-485

Power Input

Door Lock

Group B

Group C

Power

Exit Button

Door 

Contact

(Sensor)

Electric Dropbolt

Electric Strike

Note: 

The figures are for reference only.

© 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates 

(hereinafter referred to as “Hikvision”), and it cannot be reproduced, changed, translated, or 

distributed, partially or wholly, by any means, without the prior written permission of Hikvision. 

Unless otherwise expressly stated herein, Hikvision does not make any warranties, guarantees or 

representations, express or implied, regarding to the Manual, any information contained herein.

About this Manual 

The Manual includes instructions for using and managing the Product. Pictures, charts, images and 

all other information hereinafter are for description and explanation only. The information 

contained in the Manual is subject to change, without notice, due to firmware updates or other 

reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvi

-

sion.com/). 

Please use this Manual with the guidance and assistance of professionals trained in supporting the 

Product. 

Trademarks Acknowledgement

                      and other Hikvision’s trademarks and logos are the properties of Hikvision in various 

jurisdictions. 

Other trademarks and logos mentioned are the properties of their respective owners. 

LEGAL DISCLAIMER

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT 

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND 

“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, 

INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A 

PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT 

WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT 

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS 

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, 

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT 

LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION 

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. 

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, 

AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY 

LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS 

INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY 

TECHNICAL SUPPORT IF REQUIRED. 

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE 

SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. 

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT 

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF 

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. 

YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE 

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR 

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT 

RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF 

HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER 

PREVAILS. 

Data Protection

During the use of device, personal data will be collected, stored and processed. To protect data, 

the development of Hikvision devices incorporates privacy by design principles. For example, for 

device with facial recognition features, biometrics data is stored in your device with encryption 

method; for fingerprint device, only fingerprint template will be saved, which is impossible to 

reconstruct a fingerprint image. 

As data controller, you are advised to collect, store, process and transfer data in accordance with 

the applicable data protection laws and regulations, including without limitation, conducting 

security controls to safeguard personal data, such as, implementing reasonable administrative and 

physical security controls, conduct periodic reviews and assessments of the effectiveness of your 

security controls.

Notes:

 

     The power input should be 12 VDC, 1.5 A, 18 W.

     Do not wire the device to the electric supply directly.

(NC)

(COM)
(NO)

 

 

+54 9 341 6799822

+54 9 341 4577532

+54 9 341 6708000

rosarioseguridadok

Rosario Seguridad

https://www.facebook.com/groups/591852618012744/

Rosario Seguridad

+54 9 341 6591429

[email protected]

 

 

Avenida Presidente Perón 3998 - Rosario - Santa Fe - Argentina

+54 9 341 6799822

+54 9 341 4577532

+54 9 341 6708000

rosarioseguridadok

Rosario Seguridad

https://www.facebook.com/groups/591852618012744/

Rosario Seguridad

+54 9 341 6591429

[email protected]

Grupo Instaladores

Reviews: