HIKVISION PS-7104HQHI-SH User Manual Download Page 92

Page: 92 / 198

User Manual of Digital Video Recorder

DS-7100 and DS-7200 Other Models

Figure 6. 2

Right-click Menu under Live View

The DS-7100, DS-7200, and DS-7324/7332HGHI-SH provide no Aux Monitor option.

Front Panel: press

PLAY

button to play back recording files of the channel under single-screen live view mode.

Under multi-screen live view mode, the recorded files of the top-left channel will be played back.

For the DS-7300/8100/9000, pressing numerical buttons will switch playback to the corresponding camera

during playback process.

Playback management.

The toolbar in the bottom part of Playback interface can be used to control playing progress, as shown in

Figure 6. 3.

Summary of Contents for PS-7104HQHI-SH







































































































































































































Search results

Summary of Contents for PS-7104HQHI-SH

Reviews:

Related manuals for PS-7104HQHI-SH

Brands by name

Popular brands

HIKVISION PS-7104HQHI-SH, User Manual

Search results

Summary of Contents for PS-7104HQHI-SH

Reviews:

Related manuals for PS-7104HQHI-SH

Brands by name

Popular brands