HIKVISION PS-7104HQHI-SH User Manual Download Page 184

Page: 184 / 198

User Manual of Digital Video Recorder

183

13.1

Configuring RS-232 Serial Port

Purpose:

The RS-232 port can be used in two ways:

Parameters Configuration:

Connect a PC to the device through the PC serial port. Device parameters can be

configured by using software such as HyperTerminal. The serial port parameters must be the same as the device’s

when connecting with the PC serial port.

Transparent Channel:

Connect a serial device directly to the device. The serial device will be controlled

remotely by the PC through the network.

RS-232 serial port is not available for DS-7100 and DS-7200 series.

Steps:

Enter the RS-232 Settings interface.

Menu > Configuration > RS-232

Figure 1. 1

RS-232 Settings Interface

Configure RS-232 parameters, including baud rate, data bit, stop bit, parity, flow control and usage.

Click

Apply

to save the settings.

Summary of Contents for PS-7104HQHI-SH







































































































































































































Search results

Summary of Contents for PS-7104HQHI-SH

Reviews:

Related manuals for PS-7104HQHI-SH

Brands by name

Popular brands

HIKVISION PS-7104HQHI-SH, User Manual

Search results

Summary of Contents for PS-7104HQHI-SH

Reviews:

Related manuals for PS-7104HQHI-SH

Brands by name

Popular brands