HIKVISION PS-7104HQHI-SH User Manual Download Page 73

Page: 73 / 198

User Manual of Digital Video Recorder

5.2

Configuring Record Schedule

The DS-7100 models support the continuous and motion triggered recording only, DS-7200HGHI models

support continuous, motion and VCA triggered recording types, and other models support continuous, alarm,

motion, motion | alarm, motion & alarm and VCA triggered recording types.

Purpose:

Set the record schedule, and then the camera will automatically start/stop recording according to the configured

schedule.

Steps:

Enter the Record Schedule interface.

Menu> Record> Schedule

DS-7100-SH and DS-7200HGHI-SH

Other Models

Figure 5. 6

Record Schedule

Choose the camera you want to configure in the Camera dropdown list.

Check the checkbox of Enable Schedule.

Configure the record schedule.

Edit the schedule

Summary of Contents for PS-7104HQHI-SH







































































































































































































Search results

Summary of Contents for PS-7104HQHI-SH

Reviews:

Related manuals for PS-7104HQHI-SH

Brands by name

Popular brands

HIKVISION PS-7104HQHI-SH, User Manual

Search results

Summary of Contents for PS-7104HQHI-SH

Reviews:

Related manuals for PS-7104HQHI-SH

Brands by name

Popular brands