74
User Manual of PanoVu Series Network Camera
6. You can copy the settings to other alarm outputs.
7. Click
to save the settings.
6.1.6 Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address conflicted and
illegal login to the cameras.
Steps:
1. Enter the Exception settings interface:
Configuration > Event > Basic Event > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to
Step 6
in
Section
6.1.1 Configuring Motion Detection
Figure 6-12 Exception Settings
3. Click
to save the settings.
6.2 Smart Event Configuration
6.2.1 Detecting Audio Exception
Purpose:
When you enable this function and audio exception occurs, the alarm actions will be triggered.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]