73
User Manual of PanoVu Series Network Camera
Figure 6-10 Linkage Method
6.1.5 Configuring Alarm Output
Steps:
1. Enter the Alarm Output settings interface:
Configuration> Event > Basic Event > Alarm Output
2. Select one alarm output channel in the
Alarm Output
dropdown list.
3. Set a name in
for the alarm output (optional).
4. The
Delay
time can be set to
5sec
,
10sec
,
30sec
,
1min
,
2min
,
5min, 10min
or
Manual
.
The delay
time refers to the time duration that the alarm output remains in effect after alarm occurs.
5. Click
tab to enter the arming schedule setting interface. The time schedule
configuration is the same as the settings of the arming schedule for motion detection. Refer to
Step 5
in
Section 6.1.1 Configuring Motion Detection
Figure 6-11 Alarm Output Settings
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]