71
User Manual of PanoVu Series Network Camera
4. Click
tab to enter the arming schedule setting interface. The arming
schedule configuration is the same as the setting of the arming schedule for motion detection.
Refer to
Step 5
in
Section 6.1.1 Configuring Motion Detection.
5. Click
tab to select the linkage method taken for the video loss alarm. Send
Email, Notify Surveillance Center, and Trigger Alarm Output are selectable. Refer to
Step 6
in
Section 6.1.1 Configuring Motion Detection
6. Click
to save the settings.
6.1.3 Configuring Video Loss Alarm
Steps:
1. Enter the Video Loss setting interface:
Configuration > Event > Basic Event > Video Loss
Figure 6-8 Video Loss
2. Check the
Enable
checkbox to enable the video loss detection.
3. Click
tab to enter the arming schedule setting interface. The arming
schedule configuration is the same as the setting of the arming schedule for motion detection.
Refer to
Step 5
in
Section 6.1.1 Configuring Motion Detection.
4. Click
tab to select the linkage method taken for the video loss alarm. Send
Email, Notify Surveillance Center, and Trigger Alarm Output are selectable. Refer to
Step 6
in
Section 6.1.1 Configuring Motion Detection
5. Click
to save the settings.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]