Network Video Recorder User Manual
188
Select Receivers
: Select the receiver. Up to 3 receivers can be configured.
Receiver
: The receiver’s name.
Receiver's Address
: The e-mail address of the user to be notified.
Enable Attached Picture
: Check to send e-mail with attached alarm images. The interval is the time
between sending two subsequent alarm images.
Click
Apply
.
(Optional) Click
Test
to send a test e-mail.
Configuring NAT
Purpose:
Two ways are provided for port mapping to realize the remote access via the cross-segment
network, UPnP™ and manual mapping.
UPnP
TM
Universal Plug and Play (UPnP™) can permit the device seamlessly discover the presence of other
network devices on the network and establish functional network services for data sharing,
communications, etc. You can use the UPnP™ function to enable the fast connection of the device
to the WAN via a router without port mapping.
Before you start:
If you want to enable the UPnP™ function of the device, you must enable the UPnP™ function of
the router to which your device is connected. When the network working mode of the device is set
as multi-address, the Default Route of the device should be in the same network segment as that
of the LAN IP address of the router.
Go to
Menu
>
Configuration
>
Network
>
NAT
.
