HIKVISION NVR-100MH-D/W Series, User Manual

Page: 82 / 101

Network Video Recorder User Manual
70
3) To set an all-day recording schedule, check All Day and select schedule Type.
4) To set other schedules, uncheck All Day and set Start/End time and schedule Type.
Note
Up to 8 periods can be configured for each day. And the time periods cannot be overlapped
with each other.
5) Click OK to save the settings and go back to upper level menu.
Note
You can also select schedule type as Continuous or Event, and drag the cursor on the desired
period to draw a colored bar.
5. Click Advanced to set advanced parameters.
Record Audio
Audio will be record to the video file.
Pre-Record
The time you set to record before the scheduled time or event. For example, when an alarm
triggers the recording at 10:00, and if you set the pre-record time as 5 seconds, the camera
records at 9:59:55.
Post-Record
The time you set to record after the event or the scheduled time. For example, when an
alarm triggered recording ends at 11:00, and if you set the post-record time as 5 seconds, it
records till 11:00:05.
Stream Type
Main stream and sub-stream are selectable for recording. When you select sub-stream, you
can record for a longer time with the same storage space.
Video/Picture Expired Time
The expired time is period for a recorded file to be kept in the HDD. When the deadline is
reached, the file will be deleted. If you set the expired time to 0, the file will not be deleted.
The actual keeping time for the file should be determined by the capacity of the HDD.