HIKVISION NVR-100MH-D/W Series, User Manual

Page: 46 / 101

Network Video Recorder User Manual
34
Region Exiting Detection
Region exiting detection detects objects that exit from a predefined virtual region.
Steps
1. Go to Configuration → Camera → Event → Region Exiting.
Figure 5-15 Region Exiting Detection
2. Select a camera.
3. Turn on Enable.
4. Set detection rules and detection areas.
1) Set Arming Area. Up to 4 arming areas are selectable.
2) Set Sensitivity. The higher the value is, the easier the detection alarm can be triggered. Its
range is [1-100].
3) Optional: Set Target Detection as Human or Vehicle to discard alarms which are not
triggered by human body or vehicle.
4) Click Draw Area to draw a quadrilateral detection region.
5. Set the arming schedule. Refer to for Configure Arming Schedule for details.
6. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
7. Click Apply.
Configure Arming Schedule
Steps
1. Select Arming Schedule.