User Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
52
Figure 6-7
Record Schedule
5.
Choose the day to set the record schedule.
(1)
Set all-day record or segment record:
If you want to configure the all-day recording, please check the
All Day
checkbox.
If you want to record in different time sections, check the
Customize
checkbox. Set the
Start Time
and
End Time.
Note:
The time of each segment can’t be overlapped. Up to 4 segments can
be configured.
(2)
Select a
Record Type
. The record type can be Normal, Motion Detection,
Alarm, Motion | Alarm, Motion & Alarm, PIR Alarm, Wireless Alarm, Manual
Alarm or PIR | Wireless | Manual.
Normal
If you select
Normal
, the video will be recorded automatically according to
the time of the schedule.
Record Triggered by Motion Detection
If you select
Motion Detection
, the video will be recorded when the
motion is detected.
Besides configuring the recording schedule, you have to set the motion
detection area and check the checkbox of
Trigger Channel
in the
Linkage
Method
of Motion Detection Settings interface. For detailed information,
please refer to the
Step 1
Set the Motion Detection Area
in the Section
5.6.1.
Record Triggered by Alarm
If you select
Alarm
, the video will be recorded when the alarm is triggered
via the external alarm input channels.
Besides configuring the recording schedule, you have to set the
Alarm Type
and check the checkbox of
Trigger Channel
in the
Linkage Method
of
Alarm Input Settings
interface. For detailed information, please refer to