User Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
20
Note
:
If the camera is connected to a public network, you should use a NTP server
that has a time synchronization function, such as the server at the National Time
Center (IP Address: 210.72.145.44). If the camera is set in a customized network, NTP
software can be used to establish a NTP server for time synchronization.
Configuring Time Synchronization Manually
Enable the
Manual Time Sync
function and then click
to set the system time
from the pop-up calendar.
Note:
You can also check the
Sync with local time
checkbox to synchronize the time
of the camera with the time of your computer.
Figure 5-5
Time Sync Manually
4.
Check
to enable the DST function.
Figure 5-6
DST Settings
5.
Set the date of the DST period.
6.
Click
to save the settings.
5.3
Configuring Network Settings
5.3.1
Configuring TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the camera over
network.
Steps:
1.
Enter TCP/IP Settings interface:
Configuration > Basic Configuration >
Network > TCP/IP
Or
Configuration > Advanced Configuration >
Network > TCP/IP
