User Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
29
A higher frame rate is advantageous when there is movement in the video stream,
as it maintains image quality throughout.
Max. Bitrate:
Set the max. bitrate to 32~16384 Kbps. The higher value corresponds to the
higher video quality, but the higher bandwidth is required.
Video Encoding:
When the
Stream Type
of the camera is main stream, the
Video Encoding
standard can be set to H.264 or MPEG4.
When the
Stream Type
of the camera is sub-stream, the
Video Encoding
standard
can be set to H.264, MJPEG.
I Frame Interval:
Set the I-Frame interval to 1~400.
4.
Click
to save the settings.
5.4.2
Configuring Audio Settings
Steps:
1.
Enter the Audio Settings interface
Configuration >
Basic Configuration >
Video / Audio > Audio
Or
Configuration > Advanced Configuration >
Video / Audio > Audio
Figure 5-19
Audio Settings
2.
Configure the following settings.
Audio Encoding:
G.711 ulaw, G.711alaw and G.726 are selectable.
Audio Input:
MicIn and LineIn are selectable. Select MicIn to connect the
microphone and select LineIn to connect the pickup.
3.
Click
to save the settings.
5.5
Configuring Image Parameters
5.5.1
Configuring Display Settings
Purpose:
You can set the image quality of the camera, including brightness, contrast,
saturation, hue, sharpness, etc.
Note:
The Display parameters vary depending on the camera model.
