background image

Enter 

# + Public Pa #

to unlock the door.

5.3.2 Unlock by Presenting Card

Note

Make sure you have issued the card to the device.
Present the card on the card reading area to unlock.

Note

You cannot unlock the door by presenting the main card.

5.3.3 Unlock by Fingerprint

Note

• Make sure you have added the fingerprint to the device.
• Fingerprint function may vary with different modules. Please refer to the actual

devices.

Put your finger on the finger recognition module to unlock.

5.3.4 Unlock by QR Code

The device supports unlocking by QR code. You can use the camera to scan the QR

code which is created via mobile client.
Steps

Note

• Make sure the door station has been added to the indoor station.
• Make sure the indoor station is connected to Wi-Fi.
• Make sure the door station has issued the card and connected to the indoor

station.

1. Search and install the Hik-Connect to your mobile phone.
2. Register and login the client according to the notice on the page.
3. Scan the QR code/bar code on the device or enter the serial No. manually to add

the indoor station.

4. Create a QR code.

Video Intercom D Series Door Station User Manual

29

Summary of Contents for KD8023E6 Series


















































































Reviews: