3.2.2 Flush Mounting with Gang Box
Steps
1. Drill a hole in the wal for inserting the gang box. The size of the hole should be
larger than that of the gang box. The suggested size of the hole is 404.5 (W) ×
123.5 (H) × 48 (D) mm.
Figure 3-7 Drill an Installation Hole
2. Insert the gang box into the hole and fix it with 4 PA4 screws. Make sure the
edges of the gang box align to the wall.
Figure 3-8 Insert the Gang Box
3. Route the cables of the door station through the cable hole.
Video Intercom D Series Door Station User Manual
17
