manualshive.com logo in svg

HIKVISION iDS-TCM403-EIR/0411, User Manual, Page: 82 / 87

Share
Download
HIKVISION iDS-TCM403-EIR/0411 User Manual Download Page 82

Manual Synchronization

Select it to synchronize the device time with that of the computer. Set time manually, or

check Sync. with computer time.

Satellite Time

Select it to synchronize the device time with that of the satellite. Set Interval.

SDK

If the remote host has been set for the device, select it to synchronize time via the remote

host.

ONVIF

Select it to synchronize time via the third-party device.

No

Select it to disable time synchronization.

All

Select it, and you can select any mode above.

Note

The time synchronization modes vary with different models. The actual device prevails.

4. Click Save.

13.7 Set DST

If the region where the device is located adopts Daylight Saving Time (DST), you can set this

function.
Steps
1. Go to Configuration → System → System Settings → DST .
2. Check Enable DST.
3. Set Start Time, End Time, and DST Bias.
4. Click Save.

13.8 Debug

Note

The debug configurations below are only provided to debug the device by the professionals.

13.8.1 Debug Device

You can enable the functions to debug the device.

Radar-Assisted Smart Monitoring Camera User Manual

72

Summary of Contents for iDS-TCM403-EIR/0411
























































































Reviews:

No comments