HIKVISION iDS-TCM403-EIR/0411, User Manual, Page: 66 / 87

9.2 Connect to ISUP Platform
ISUP (EHome) is a platform access protocol. The device can be remotely accessed via this platform.
Before You Start
●
Create the device ID on ISUP platform.
●
Ensure the device can communicate with the platform normally.
Steps
1. Go to Configuration → Network → Data Connection → ISUP .
Figure 9-2 Connect to ISUP Platform
2. Check Enable.
3. Select Protocol Version.
4. Select Address Type.
5. Enter Sever IP Address, Server Port, and Device ID.
Note
You need to enter Key if you select Protocol Version as v5.0.
6. Optional: For protocol v5.0, you can enable Upload Binary Image if you need to upload images
which are full of black or white pixel points.
Note
Enable Output Binary Image in BMP Format if you want to output images in this format.
7. Click Save.
8. Optional: View Register Status.
Radar-Assisted Smart Monitoring Camera User Manual
56