HIKVISION iDS-TCM403-EIR/0411, User Manual, Page: 30 / 87

Figure 3-2 Manual Calibration
3. Draw the lane lines.
1) Select the lane sum.
2) Select the lane line No.
3) Click Draw Lane Line.
The selected lane line will be displayed on the live view picture.
4) Drag the two end points of the line or drag the whole line to adjust its position according to
the actual scene.
5) Repeat the steps above to draw more lane lines.
4. Draw the calibration area.
1) Select Calibration Point.
2) Click Calibration.
3) Click the left button of the mouse to locate the vertexes of the calibration area on the live
view image, and click the right button of the mouse to finish the drawing.
Note
The number of vertexes should be consistent with the selected number of Calibration Point.
4) Drag the vertexes of the calibration area to align it to the lanes.
Note
●
If the lanes cannot be aligned, ensure the calibration area can contain the detection area.
●
You can refer to the schematic diagram and top view description to draw the calibration
area.
5) Optional: Click Clear to clear the drawn calibration area.
5. Measure the world coordinates of the vertexes, and enter the values in the corresponding
coordinate text fields.
Radar-Assisted Smart Monitoring Camera User Manual
20