manualshive.com logo in svg

HIKVISION iDS-TCM403-EIR/0411, User Manual, Page: 65 / 87

Share
Download
HIKVISION iDS-TCM403-EIR/0411 User Manual Download Page 65

Note

The network that the device is connected to should support DHCP (Dynamic Host

Configuration Protocol).

Manual

You can set the device IP parameters manually. Enter IPv4 Address, IPv4 Subnet Mask, and

IPv4 Default Gateway.

IPv6

Three IPv6 modes are available.
Route Advertisement

The IPv6 address is generated by combining the route advertisement and the device Mac

address.

Note

Route advertisement mode requires the support from the router that the device is

connected to.

DHCP

The IPv6 address is assigned by the server, router, or gateway.

Manual

Enter IPv6 Address, IPv6 Subnet Mask, and IPv6 Gateway. Consult the network

administrator for required information.

MTU

It stands for maximum transmission unit. It is the size of the largest protocol data unit that

can be communicated in a single network layer transaction.
The valid value range of MTU is 1280 to 1500.

Multicast Address

Multicast is group communication where data transmission is addressed to a group of

destination devices simultaneously. After setting the IP address of the multicast host, you can

send the source data efficiently to multiple receivers.

DNS

It stands for domain name server. It is required if you need to visit the device with domain

name. And it is also required for some applications (e.g., sending email). Set Preferred DNS

Address properly if needed.

3. Click Save.

Radar-Assisted Smart Monitoring Camera User Manual

55

Summary of Contents for iDS-TCM403-EIR/0411
























































































Reviews:

No comments