HIKVISION iDS-2CD8A46G0-IZHS User Manual Download Page 75

Page: 75 / 211

Network Camera User Manual

You can set the port No. of the camera, e.g., HTTP port, RTSP port and HTTPS port.

Steps:

Enter the Port Settings interface, Configuration > Network > Basic Settings > Port

Port Settings

Set the

ports of the camera.

HTTP Port: The default port number is 80, and it can be changed to any port No.

that is not occupied.

RTSP Port: The default port number is 554 and it can be changed to any port No.

ranges from 1 to 65535.

HTTPS Port: The default port number is 443, and it can be changed to any port No.

that is not occupied.

Server Port: The default server port number is 8000, and it can be changed to any

port No. ranges from 2000 to 65535.

Note:

When you use client software to visit the camera and you have changed the server

port number, you have to input the correct server port number in login interface

to access to the camera.

WebSocket Port: The default port number is 7681. It can be changed to any port

No. ranges from 1 to 65535.

WebSockets Port: The default server port number is 7682. It can be changed to

any port No. ranges from 1 to 65535.

Note:

Summary of Contents for iDS-2CD8A46G0-IZHS




















































































































































































































Search results

Summary of Contents for iDS-2CD8A46G0-IZHS

Reviews:

HIKVISION iDS-2CD8A46G0-IZHS, User Manual, Page: 75 / 211

Search results

Summary of Contents for iDS-2CD8A46G0-IZHS

Reviews: