HIKVISION iDS-2CD8A46G0-IZHS User Manual Download Page 29

Page: 29 / 211

Network Camera User Manual

Wi-Fi Settings

Purpose:

By connecting to the wireless network, you do not need to use cable of any kind for

network connection, which is very convenient for the actual video security application.

Note:

This chapter is only applicable for the cameras with the built-in Wi-Fi module.

Configuring Wi-Fi Connection in Manage and Ad-hoc

Modes

Purpose:

Two connection modes are supported. Choose a mode as desired and perform the

steps to configure the Wi-Fi.

Wireless Connection in Manage Mode

Steps:

Enter the Wi-Fi configuration interface.

Configuration> Network> Advanced Settings> Wi-Fi

Click Search to search the online wireless connections.

Summary of Contents for iDS-2CD8A46G0-IZHS




















































































































































































































Search results

Summary of Contents for iDS-2CD8A46G0-IZHS

Reviews:

HIKVISION iDS-2CD8A46G0-IZHS, User Manual, Page: 29 / 211

Search results

Summary of Contents for iDS-2CD8A46G0-IZHS

Reviews: