HIKVISION iDS-2CD8A46G0-IZHS User Manual Download Page 161

Page: 161 / 211

Network Camera User Manual

160

Counting

Counting function helps to calculate the number of people entered or exited a certain

configured area and is widely applied to the entrances or exits.

Compared with the people counting function supported by iDS camera, counting

function needs no camera calibration.

Notes:

It is recommended to install the camera as right above the entrance/exit as possible,

and make sure it is horizontal to improve the counting accuracy.

Steps:

Enter the Counting Configuration interface: Configuration > Counting.

Counting Configuration

Check the Enable Counting checkbox to enable the function.

Check the Enable OSD Overlay checkbox, and the real-time number of people

entered and exited is displayed on the live video.

Summary of Contents for iDS-2CD8A46G0-IZHS




















































































































































































































Search results

Summary of Contents for iDS-2CD8A46G0-IZHS

Reviews:

HIKVISION iDS-2CD8A46G0-IZHS, User Manual, Page: 161 / 211

Search results

Summary of Contents for iDS-2CD8A46G0-IZHS

Reviews: